Get in Touch
Follow us

Buraq Integrated Solutions

Founded in 2000, Buraq Integrated Solutions (BIS) has successfully executed multidisciplinary projects across Bangladesh, Maldives, Singapore, Thailand, Indonesia, Turkey, UAE, Bahrain, KSA, Australia, and the USA.

Contact Us

Location
HQ: Buraq Integrated Solutions,
11-D, 6th Road, Satellite Town, Rawalpindi, Pakistan.

STZ: Buraq Integrated Solutions,
1st Floor, Alpha-18, NASTP, Old Airport Road, Rawalpindi, Pakistan.

AUS: Buraq Integrated Solutions,
Unit 55, 10 Yato Road, Prestons NSW 2170, Australia.

Phone
+92 51 484 0137
+92 333 513 2514
+92 300 512 1896
Email
Home > Products > Sensors and Instruments > Soil Sensors > Electrical Conductivity and Temp (ES-2)
Introduction to Sensor

Electrical Conductivity and Temp (ES-2)

Measure Water EC. Understand Your Soil

The ES-2 Electrical Conductivity and Temperature Sensor is designed to measure the electrical conductivity and temperature of water in pipes and tanks. When paired with a TEROS 12 soil moisture sensor, it helps provide a more complete understanding of the salts entering an irrigation system and those remaining in the soil or substrate.

Specifications

Specifications

Measurement Specifications

ParameterSpecifications
TemperatureRange: –40 to 60 °C
Resolution: 0.1 °C
Accuracy: ±1 °C
Bulk Electrical Conductivity (EC)Range: 0 to 120 dS/m
Resolution: 0.001 dS/m
Accuracy: ±0.01 dS/m or ±10% (whichever is greater)

Communication Specifications

ParameterSpecifications
OutputDDI serial or SDI-12 communication protocol
Data Logger CompatibilityMETER ZL6 data loggers and any data acquisition system capable of 3.6- to 15-VDC power and serial or SDI-12 communication

Physical Specifications

ParameterSpecifications
DimensionsLength: 10.9 cm (4.30 in)
Width: 2.4 cm (0.95 in)
Thread: 1/2-in National Pipe Thread
In-line pipe connector type: 1-in Tee socket pipe fitting
Operating Temperature RangeMinimum: –-40 °C
Maximum: 60 °C
NOTE: Sensors may be used at higher temperatures under certain conditions; contact Customer Support for assistance.
Cable Length5 m (standard)75 m (maximum custom cable length)
NOTE: Contact Customer Support if a nonstandard cable length is needed.
Connector Types3.5-mm stereo plug connector or stripped and tinned wires

Electrical and Timing Characteristics

ParameterSpecifications
Supply VoltageMinimum: 3.6 V
Maximum: 15.0 V
Digital Input Voltage (Logic High)Minimum: 2.8 V
Typical: 3.6 V
Maximum: 5.0 V
Digital Input Voltage (Logic Low)Minimum: –0.3 V
Typical: 0.0 V
Maximum: 0.8 V
Digital Output Voltage (Logic High)Typical: 3.6 V
Power Line Slew RateMinimum: 1.0 V/ms
Current Drain (During Measurement)Minimum: 20 mA
Typical: 20 mA
Maximum: 28 mA
Current Drain (While Asleep)Typical: 0.03 mA
Power Up Time (DDI Serial)Maximum: 100 ms
Power Up Time (SDI-12)Minimum: 100 ms
Typical: 200 ms
Maximum: 250 ms
Power Up Time (SDI-12, DDI Disabled)Typical: 125 ms
Measurement DurationTypical: 25 ms
Maximum: 50 ms

Other

ParameterSpecifications
GSAView GSA details
ComplianceEM ISO/IEC 17050:2010 (CE Mark)
Prop 65 warningProp 65 warning
Features

Special Features

01

Pipe and Tank Installation

Designed specifically for measuring water electrical conductivity in pipes or tanks, making it suitable for a variety of water monitoring systems.
02

Water Temperature Measurement

Provides water temperature measurements alongside electrical conductivity for more complete water monitoring.
03

Irrigation Water Assessment

Helps monitor the electrical conductivity of irrigation water, supporting better assessment of water quality before it reaches crops.
04

Complete Water and Soil Data

When used with a TEROS 12, the ES-2 helps create a picture of salts entering the system and salts remaining in the soil or substrate.
Applications

Primary Applications

Irrigation Water Monitoring
Greenhouse & Controlled Agriculture
water management
Water Quality & Warer Monitoring
water-system
Fertilizer & Nutrient Management
Related Products

Related Products

Electromagnetic Flowmeter (4800)

The 4800 Electromagnetic Flowmeter is a high-accuracy device designed for precise measurement of liquid flow in pipes and channels. Using Faraday’s law of electromagnetic……

Oceanographic Radar Sensor (LX80-O)

The Geolux LX80-O Oceanographic Radar Sensor is a compact, non-contact radar sensor designed for accurate measurement of tidal sea levels and wave parameters from…..

Open Channel Flow Meter (FX100)

The Geolux FX100 is an advanced non-contact flow monitoring solution engineered for accurate surface velocity, water level, and discharge measurement in……

Open Channel Flow Meter with LiDAR for Channel Scanning (FX200)

The Geolux FX200 is a next-generation non-contact flow monitoring solution designed for accurate river, canal, and open-channel measurements……

Open Channel Surface Velocity Radar Meter (VX60)

The Geolux VX60 is a compact and high-precision non-contact surface velocity radar designed for reliable flow monitoring in rivers, canals, and open channels……

Radar Level Sensor (LX80)

The Geolux LX80 is a high-performance, non-contact radar sensor designed for accurate water level measurement using 80 GHz technology. It delivers stable and…..

Surface Velocity Radar (RSS-2-300W)

The Geolux RSS-2-300W is a high-precision, non-contact Doppler radar sensor designed to measure surface water flow velocity in rivers, canals, and open channels…..

Ultrasonic Liquid Level Transmitter (RKL-03)

The RKL-03 Ultrasonic Level Transmitter is a reliable, non-contact solution for liquid level measurement, offering easy installation and minimal maintenance……

Water Level Radar (RS-RAD N01-VY1)

The Water Level Radar RS-RAD N01-VY1 by NiuBoL is a high-performance non-contact radar sensor designed for accurate water level monitoring in rivers, reservoirs…..