Get in Touch
Follow us

Buraq Integrated Solutions

Founded in 2000, Buraq Integrated Solutions (BIS) has successfully executed multidisciplinary projects across Bangladesh, Maldives, Singapore, Thailand, Indonesia, Turkey, UAE, Bahrain, KSA, Australia, and the USA.

Contact Us

Location
HQ: Buraq Integrated Solutions,
11-D, 6th Road, Satellite Town, Rawalpindi, Pakistan.

STZ: Buraq Integrated Solutions,
1st Floor, Alpha-18, NASTP, Old Airport Road, Rawalpindi, Pakistan.

AUS: Buraq Integrated Solutions,
Unit 55, 10 Yato Road, Prestons NSW 2170, Australia.

Phone
+92 51 484 0137
+92 333 513 2514
+92 300 512 1896
Email
Home > Products > Sensors and Instruments > Air Temp, RH and Pressure Sensors > Temp, Humidity, Barometric and Vapor Pressure (ATMOS 14)
Introduction to Sensor

Temp, Humidity, Barometric and Vapor Pressure (ATMOS 14)

Reliable Environmental Data, Made Simple

The ATMOS 14 is a fast and reliable environmental sensor designed to measure air temperature, relative humidity, barometric pressure, and vapor pressure in a single compact device. With four measurements from one sensor, it makes environmental monitoring and sensor benchmarking simple and efficient. When paired with the ZL6 Data Logger, data can be collected remotely for convenient monitoring and analysis. 

Specifications

Specifications

Measurement Specifications

MeasurementSpecifications
Relative Humidity (RH)Range: 0 – 100 % RH (0.00–1.00)
Resolution: 0.10% RH
Accuracy: Sensor measurement accuracy is variable across a range of RH.
See specification chart.
Equilibration Time (τ, 63%): < 25 s (response time in 1 m/s air stream)
Hysteresis: ±0.80% RH, typical
Long-term Drift: ±0.25% RH/year, typical
TemperatureRange: -40–80 °C
Resolution: 0.1 °C
Accuracy: ±0.2 °C
Equilibration Time (τ, 63%): < 165 s (response time in 1 m/s air stream)
Long-term Drift: < 0.03 °C/ year, typical
Vapor PressureRange: 0 – 47 kPa
Resolution: 0.01 kPa
Accuracy: Sensor measurement accuracy is variable across a range of temperatures and RH.
See specification chart.
Barometric PressureRange: 1 – 120 kPa
Resolution: 0.01 kPa
Accuracy: ±0.05 kPa at 25 °C
Equilibration Time (τ, 63%): < 10 ms
Long-term Drift: < 0.1 kPa/year, typical

Communication Specifications

ParameterSpecification
OutputDDI serial or SDI-12 communication
Data Logger CompatibilityAny data acquisition system capable of 4.0- to 15.0-VDC power and serial or SDI-12 communication.

Physical Specifications

ParameterSpecification
DimensionsDiameter: 2.0 cm (0.8 in)
Height: 5.4 cm (2.1 in)
Operating Temperature RangeMinimum: –40.00 °C
Maximum: 80.00 °C
NOTE: Sensors may be used at higher temperatures under certain conditions; contact Customer Support for assistance.
Cable Length5 m (standard)75 m (maximum custom cable length)
Cable Diameter0.165 ±0.004 in (4.20 ±0.10 mm), with minimum jacket of 0.030 in (0.76 mm)
Connector Types3.5-mm stereo plug connector or stripped and tinned wires
Conductor Gauge22-AWG / 24-AWG drain wire

Electrical and Timing Characteristics

ParameterSpecification
Supply Voltage (VCC to GND)Minimum: 4.0 VDC
Maximum: 15.0 VDC
Digital Input Voltage (Logic High)Minimum: 2.8 V
Typical: 3.6 V
Maximum: 5.0 V
Digital Input Voltage (Logic Low)Minimum: –0.3 V
Typical: 0.0 V
Maximum: 0.8 V
Digital Output Voltage (Logic High)Minimum: NA
Typical: 3.6 V
Maximum: NA
Power Line Slew Rate1.0 V/ms
Current Drain (During Measurement)Minimum: 1.2 mA
Typical: 3.5 mA
Maximum: 12.0 mA
Current Drain (While Asleep)Minimum: NA
Typical: 0.03 mA
Maximum: NA
Power Up Time (DDI Serial)Minimum: NA
Typical: NA
Maximum: 110 ms
Power Up Time (SDI-12)Minimum: 140 ms
Typical: 260 ms
Maximum: 400 ms
Power Up Time (SDI-12, DDI Serial Disabled)Minimum: 140 ms
Typical: 170 ms
Maximum: 200 ms
Measurement DurationMinimum: NA
Typical: 50 ms
Maximum: NA

Other

ParameterSpecification
ComplianceProp 65 warning
GSAView GSA details
Features

Special Features

01

Plug & Play

Designed for quick and hassle-free installation, the ATMOS 14 offers plug-and-play capability, making setup simple and efficient.
02

Data Collection

When connected to the ZL6 Data Logger, the ATMOS 14 enables convenient remote data collection and monitoring.
03

Built for Outdoor Use

A protective Teflon screen helps shield the sensor from weather conditions while maintaining reliable performance.
04

Accurate Response

The ATMOS 14 provides a fast response and uses integrated temperature measurement to improve measurement accuracy.
Applications

Primary Applications

Meteorological Stations
Agriculture Monitoring
Greenhouse Monitoring
Research & Field Studies
Related Products

Related Products

Atmospheric Temperature, Humidity & Pressure Sensor (BS330-01)

The BS330-01 Atmospheric Temperature, Humidity and Pressure Sensor is a Professional measurement of air temperature, relative humidity & barometric……

Air Temperature and Relative Humidity Sensor (HMP155A)

The Vaisala HMP155A is a high-performance probe designed for precise and dependable relative humidity and air temperature measurements across demanding……

Digital Temperature and Relative Humidity Sensor (HygroVue 5)

The HygroVue™5 is a compact digital sensor engineered for reliable air temperature and relative humidity measurements in meteorological and environmental monitoring……

Digital Temperature and Relative Humidity Sensor with M12 Connector (HygroVue 10)

The HygroVue™10 combines precise air temperature and relative humidity measurement in a compact digital sensor ideal for weather and environmental monitoring……

Multi-Plate Solar Radiation Shield (BS-95)

The Multi-Plate Solar Radiation Shield is designed to safeguard temperature, relative humidity, and barometric pressure sensors from error-inducing solar…..